Advanced Inspection Services

Advanced Inspection Services A PROFESSIONAL INSPECTION FOR YOUR PROTECTION

Call Us!

Central Coast, CA
(805) 934-8486

Southern NV
(702) 274-5302


Our mold inspection experts can assure you that the indoor environment where you and your family spend most of your time is safe, clean, and free from the danger of potentially toxic mold.  We use a variety of certified testing methodologies and forensic lab analyses to provide you with detailed reports on all findings and recommendations.

Banner Image: 
Tablebox1 CA: 
Full-Property Mold Inspetions (<abbr title="California">CA</abbr>)
Rates continue to increase $50 for each additional 500 square feet.<br/>$75.00 fee for crawl space/raised foundation.<br />Please call for quote/offer on properties over 5,000 square feet.
A <strong>Mold Inspection</strong> is the visual “pre-mold sampling” inspection. It consists of visual inspection and reporting of all readily accessible areas for mold and/or conditions that may indicate the presence of mold. No samples are taken in this visual inspection. Our reports will note all areas inspected, and “Red Flag” areas will be noted if it is recommended to have a sample taken.
SQUARE FEETRATE
Up to 1500$200.00
1501 - 2000$250.00
2001 - 2500$300.00
2501 - 3000$350.00
3001-3500$400.00
Mold Sampling (<abbr title="California">CA</abbr>)
Additional bulk sampling discounts available. Please call for a quote/offer.
<strong>Mold Sampling</strong> is when the inspector will take swab, bulk, or air sample of “Red Flag” areas or areas requested by the client. Swabs are small cotton swab samples that are rubbed on the testing area. Bulk samples are patches of carpet or a piece of wall that is to be tested. Air samples are always considered 2 samples. Air from the room or area of desired testing and outdoor air for comparison (this is required to get proper test results).
# OF SAMPLESRATE
Up to 4$125.00 each
Add'l Samples$75.00 each
Mold Clearance Testing (<abbr title="California">CA</abbr>)
Please call for a custom quote/offer for more than one defined area.
<strong>Mold Clearance Testing</strong> consists of two parts. (1) Visual inspection for mold problems in area(s) of remediation, and (2) the collection of sample(s) in these remediated areas. The objective of the clearance testing is to determine if mold still exist in the designated remediation area. Air samples are required (indoor and comparison outdoor air samples) to complete the clearance. Testing is always conducted when mold remediation and clean-up efforts are completed, but before containment is removed and renovation activities have started. A passing clearance test is defined as air samples collected indoors being quantitatively equal or less than the outdoor air samples collected and qualitatively similar.
SERVICERATE
Testing & Certification<br />(each defined area)$500.00
Tablebox1 NV: 
Full-Property Mold Inspetions (<abbr title="Nevada">NV</abbr>)
Rates continue to increase $50 for each additional 500 square feet.<br/>$75.00 fee for crawl space/raised foundation.<br />Please call for quote/offer on properties over 5,000 square feet.
A <strong>Mold Inspection</strong> is the visual “pre-mold sampling” inspection. It consists of visual inspection and reporting of all readily accessible areas for mold and/or conditions that may indicate the presence of mold. No samples are taken in this visual inspection. Our reports will note all areas inspected, and “Red Flag” areas will be noted if it is recommended to have a sample taken.
SQUARE FEETRATE
Up to 1500$200.00
1501 - 2000$250.00
2001 - 2500$300.00
2501 - 3000$350.00
3001-3500$400.00
Mold Sampling (<abbr title="Nevada">NV</abbr>)
Additional bulk sampling discounts available. Please call for a quote/offer.
<strong>Mold Sampling</strong> is when the inspector will take swab, bulk, or air sample of “Red Flag” areas or areas requested by the client. Swabs are small cotton swab samples that are rubbed on the testing area. Bulk samples are patches of carpet or a piece of wall that is to be tested. Air samples are always considered 2 samples. Air from the room or area of desired testing and outdoor air for comparison (this is required to get proper test results).
# OF SAMPLESRATE
Up to 4$125.00 each
Add'l Samples$75.00 each
Mold Clearance Testing (<abbr title="Nevada">NV</abbr>)
Please call for a custom quote/offer for more than one defined area.
<strong>Mold Clearance Testing</strong> consists of two parts. (1) Visual inspection for mold problems in area(s) of remediation, and (2) the collection of sample(s) in these remediated areas. The objective of the clearance testing is to determine if mold still exist in the designated remediation area. Air samples are required (indoor and comparison outdoor air samples) to complete the clearance. Testing is always conducted when mold remediation and clean-up efforts are completed, but before containment is removed and renovation activities have started. A passing clearance test is defined as air samples collected indoors being quantitatively equal or less than the outdoor air samples collected and qualitatively similar.
SERVICERATE
Testing & Certification<br />(each defined area)$500.00

FEE SCHEDULE(S)

Please call for a quote!

Central Coast, CA
(805) 934-8486

San Diego County, CA
(760) 710-9512

Southern NV
(702) 274-5302

Pahrump, NV
(775) 513-6104

Full-Property Mold Inspetions (CA)

SQUARE FEETRATE
Up to 1500$200.00
1501 - 2000$250.00
2001 - 2500$300.00
2501 - 3000$350.00
3001-3500$400.00
Rates continue to increase $50 for each additional 500 square feet.
$75.00 fee for crawl space/raised foundation.
Please call for quote/offer on properties over 5,000 square feet.
A Mold Inspection is the visual “pre-mold sampling” inspection. It consists of visual inspection and reporting of all readily accessible areas for mold and/or conditions that may indicate the presence of mold. No samples are taken in this visual inspection. Our reports will note all areas inspected, and “Red Flag” areas will be noted if it is recommended to have a sample taken.

Mold Sampling (CA)

# OF SAMPLESRATE
Up to 4$125.00 each
Add'l Samples$75.00 each
Additional bulk sampling discounts available. Please call for a quote/offer.
Mold Sampling is when the inspector will take swab, bulk, or air sample of “Red Flag” areas or areas requested by the client. Swabs are small cotton swab samples that are rubbed on the testing area. Bulk samples are patches of carpet or a piece of wall that is to be tested. Air samples are always considered 2 samples. Air from the room or area of desired testing and outdoor air for comparison (this is required to get proper test results).

Mold Clearance Testing (CA)

SERVICERATE
Testing & Certification
(each defined area)
$500.00
Please call for a custom quote/offer for more than one defined area.
Mold Clearance Testing consists of two parts. (1) Visual inspection for mold problems in area(s) of remediation, and (2) the collection of sample(s) in these remediated areas. The objective of the clearance testing is to determine if mold still exist in the designated remediation area. Air samples are required (indoor and comparison outdoor air samples) to complete the clearance. Testing is always conducted when mold remediation and clean-up efforts are completed, but before containment is removed and renovation activities have started. A passing clearance test is defined as air samples collected indoors being quantitatively equal or less than the outdoor air samples collected and qualitatively similar.

Please call for a quote!

Southern NV
(702) 274-5302

Pahrump, NV
(775) 513-6104

Central Coast, CA
(805) 934-8486

San Diego County, CA
(760) 710-9512

Full-Property Mold Inspetions (NV)

SQUARE FEETRATE
Up to 1500$200.00
1501 - 2000$250.00
2001 - 2500$300.00
2501 - 3000$350.00
3001-3500$400.00
Rates continue to increase $50 for each additional 500 square feet.
$75.00 fee for crawl space/raised foundation.
Please call for quote/offer on properties over 5,000 square feet.
A Mold Inspection is the visual “pre-mold sampling” inspection. It consists of visual inspection and reporting of all readily accessible areas for mold and/or conditions that may indicate the presence of mold. No samples are taken in this visual inspection. Our reports will note all areas inspected, and “Red Flag” areas will be noted if it is recommended to have a sample taken.

Mold Sampling (NV)

# OF SAMPLESRATE
Up to 4$125.00 each
Add'l Samples$75.00 each
Additional bulk sampling discounts available. Please call for a quote/offer.
Mold Sampling is when the inspector will take swab, bulk, or air sample of “Red Flag” areas or areas requested by the client. Swabs are small cotton swab samples that are rubbed on the testing area. Bulk samples are patches of carpet or a piece of wall that is to be tested. Air samples are always considered 2 samples. Air from the room or area of desired testing and outdoor air for comparison (this is required to get proper test results).

Mold Clearance Testing (NV)

SERVICERATE
Testing & Certification
(each defined area)
$500.00
Please call for a custom quote/offer for more than one defined area.
Mold Clearance Testing consists of two parts. (1) Visual inspection for mold problems in area(s) of remediation, and (2) the collection of sample(s) in these remediated areas. The objective of the clearance testing is to determine if mold still exist in the designated remediation area. Air samples are required (indoor and comparison outdoor air samples) to complete the clearance. Testing is always conducted when mold remediation and clean-up efforts are completed, but before containment is removed and renovation activities have started. A passing clearance test is defined as air samples collected indoors being quantitatively equal or less than the outdoor air samples collected and qualitatively similar.

REQUEST MORE INFO